Cuckoo Customized Taste Function / For Nurungji (Korean Crispy Rice Snack) - Cuckoo CRP-PK06 Series Operating Instructions Manual

CUCKOO CUSTOMIZED TASTE FUNCTION /
FOR NURUNGJI (KOREAN CRISPY RICE SNACK)
Cuckoo customized cooking function
While cooking you can control the heating temperature (both high and low) depending on your preference.
Initialization is set up "
- High step: for cooking cereals, soft-boiled rice.
- Low step: for cooking the year's crop of rice.
How to use customized cooking function.
Enter Warming Temperature Mode by pressing Auto Clean button for 3 seconds, and then enter "MY MODE"
by pressing the Auto Clean button twice. Available cooking options will be displayed in the initial "My Mode"
settings.
❶
My Mode Setting Screen
Enter Warming Temperature Mode
by pressing Auto Clean button for
3 seconds, and then enter "MY
MODE" by pressing the Auto
Clean button twice. The following
screen is displayed in the initial
"MY MODE" settings.
1. 'Cuckoo Customized Cooking' applies to the following modes: Glutinous Rice, High Heat Glutinous Rice, Mixed Rice, High Heat Mixed Rice, Brown
Rice, High Heat Brown Rice, Gaba Rice.
2. Set the step of the Customized Cooking. Be cautious not to set the temperature too high as rice might adhere to the Inner Pot.
3. The results of cooking can vary depending on the amount of water and rice.
How to use the Nu Rung Ji function
1. Lock the Lock/Unlock Handle and select the Nu Rung Ji mode by pressing the Menu/Selection button.
2. Press the Pressure Cook/Turbo button to start cooking.
3. Once cooking is complete, open the lid, scoop out the rice and enjoy your Nu Rung Ji.
▶ The Nu Rung Ji mode can serve up to 4 persons.
▶Set the amount of water for cooking "Glutinous/Mixed Rice."
▶ Do not wash the rice too clean for cooking. (Enough to opaque water)
▶ For Nu Rung Ji, place rice and water in the Inner Pot and leave it for about 30 minutes with the lid closed before cooking.
How to set up the function of burning Nu Rung Ji
▶ How to set up the enhanced burning Nu Rung Ji (for enhanced burning Nu Rung Ji)
1. Press the Auto Clean button on the Standby mode for more than 3 seconds to enter the cooking temperature setting
mode, and then enter the burning Nu Rung Ji mode by pressing the Auto Clean button three times.
2. On the initial screen of the Burning Nu Rung Ji mode, press the Menu/Selection button to 'On' or 'Off,' and then
press Pressure Cook/Turbo or Keep Warm/Reheat button to confirm the selected mode.
3. If no button is pressed
16
" get step by step as the case may be.
❷- 1
High Step Adjustment Mode
Press the Menu/Selection button
as shown in the picture above.
❷- 2
Low Step Adjustment Mode
Press the Menu/Selection button as shown
in the picture above.
Burning Nu Rung Ji
Mode On
❸
Setting Completed Screen
Press the Pressure Cook/Turbo or
the Keep Warm/Reheat button to
save the the set value and return to
the home screen (It returns to
Standby mode if you press cancel or
no button for 7 seconds in the MY
MODE setting menu). (If you press
the Auto Clean button, you will enter
the burning Nu Rung Ji setting mode
without the changed value saved.)
or
Burning Nu Rung Ji
Mode Off
or
or