Toro 07363 Operator's Manual page 41

Air cooled gas utility vehicle
Table of Contents

Advertisement

1. Front of vehicle
2. .12 ± .12 inch greater than
rear of tire
2. Adjust the center–to–center distance as follows:
• On the right front wheel, loosen the jam nuts at
both ends of the tie rod (Figure 45).
1. Tie rod
• On the left front wheel, loosen the jam nuts at
both ends of the turn buckle (Figure 46).
1. Turn buckle
• Rotate the tie rod and turnbuckle evenly to move
the front of the tire inward or outward to achieve
the center to center distances from front to back.
Figure 44
3. Center to center distance
Figure 45
Figure 46
• Tighten tie rod and turnbuckle jam nuts when
the adjustment is correct.
• Check to make sure the tires turn an equal
amount to the right and to the left. If the tires do
not turn equally, refer to the Workman Service
Manual for the adjustment procedure
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workman 3100

Table of Contents