10. COMMUNICATIONS IN THE BIDIRECTIONAL MODE
MELSEC-A
POINT
In the bidirectional mode, data is not converted to ASCll code in the
AlSJ71C24. If ASCll code is required, the data must be processed into
ASCll code in the AlSCPU.
r
(2) Designating word/byte units for bidirectional mode communications
For data communications in the bidirectional mode, units of data to be
transmitted may be selected between words and bytes. Default setting
for data unit selection is "word", but selection is possible by writing "1"
or "0" to address 103H in the buffer memory area.
(Section 7.4.3 gives details of the program to make this setting.)