Table of Contents
Advertisement
en Before using for the first time
To place the accessory at shelf positions with pull-
3.
out rails, pull out the pull-out rails.
Wire rack
Place the accessory so that it is in-
or baking
serted on the rear stop of the pull-out
tray
system.
Note: The pull-out rails lock in place when they are
fully pulled out. Gently push the pull-out rails back
into the cooking compartment.
Push the accessory all the way in, making sure that
4.
it does not touch the appliance door.
Note: Take any accessories that you will not be using
out of the cooking compartment while the appliance is
in operation.
Combining accessories
You can combine the wire rack with the universal pan
to catch any liquid that drips down.
Before using for the first time
7 Before using for the first time
Implement the settings for the initial configuration. Calibrate the appliance. Clean the appliance and accessories.
7.1 Determining the water hardness before switching on the appliance for the first time
Before using the appliance for the first time, ask your
water supplier about the hardness of your tap water. To
ensure that the appliance can reliably remind you to
descale it when required, you must set your water hard-
ness range correctly.
Setting
1
0 (softened)
1 (soft)
2 (medium)
3 (hard)
4 (very hard)
Only set this if you will be using solely softened water.
1
7.2 Performing initial start-up
After connecting the appliance to the power supply,
you must configure the settings for its initial start-up. It
may take a few minutes for the settings to appear on
the display.
12
1.
2.
6.4 Other accessories
You can purchase other accessories from our cus-
tomer service, specialist retailers or online.
You will find a comprehensive range of products for
your appliance in our brochures and online:
siemens-home.bsh-group.com
Accessories are appliance-specific. When purchasing
accessories, always quote the exact product number (E
no.) of your appliance.
You can find out which accessories are available for
your appliance in our online shop or from our customer
service.
ATTENTION!
If the wrong water hardness has been set, the appli-
ance cannot remind you to descale it at the right time.
▶
Note: If your tap water is very hard, we recommend
that you use softened water. If you are using only
softened water, set the "softened" water hardness
range.
Water hardness in
mmol/l
-
Up to 1.5
1.5-2.5
2.5-3.8
Over 3.8
Note: You can also use the Home Connect app to con-
figure the settings. When your appliance is connected,
follow the instructions in the app.
1.
a The first setting appears.
2.
Place the wire rack on the universal pan so that
both spacers
are on the rear edge of the univer-
sal pan.
Insert the universal pan between the two guide rods
for a shelf position. In so doing, the wire rack is on
top of the upper guide rod.
Wire rack
on univer-
sal pan
Set the water hardness correctly.
German hardness °dH
-
Up to 8.4
8.4-14
14-21.3
Over 21.3
Press
to switch the appliance on.
If required, change the setting.
French hardness °fH
-
Up to 15
15-25
25-38
Over 38
Advertisement
Table of Contents
