Panasonic DL-EH30SE-W Operation Instructions Manual page 16

Electric bidet seat (household use)
Hide thumbs Also See for DL-EH30SE-W:
Table of Contents

Advertisement

Maintenance
When the seat is unoccupied, long press
Starts 1 minute of cleaning. At this time, the Nozzle Cleaning indicator is on in red.
Stops cleaning after 1 minute. The Nozzle Cleaning indicator is off.
(The Water Temperature indicator displays the original settings.)
When you want to stop the ongoing cleaning
operation early, long press
at more than 2 seconds or press
Nozzle Cleaning (When some dirts are found on the nozzle)
Wear a pair of rubber gloves and clean the nozzle using a toothbrush.
Spray Nozzle Cleaning
Open the lid and seat. Press
The nozzle extends. (Cleaning water comes from the
position near the nozzle base.)
With the nozzle is held in your hand, brush it gently with
a toothbrush or similar tools.
Bidet Nozzle Cleaning
Press
The nozzle retracts and extends.
(Cleaning water comes from the position near the nozzle base.)
With the nozzle held in your hand, brush it gently with a
toothbrush or similar tools.
Press
The nozzle retracts.
Note
When cleaning the nozzle, do not press the Occupancy button. (Otherwise, showering water will be sprayed.)
When cleaning the nozzle, do not exert strong force on it.
Do not pull out or push in the nozzle forcefully by hand. (Risk of failure)
Tips
During cleaning, the nozzle will remain extended for 3 minutes. After 3 minutes, it will retract automatically.
During cleaning, the seat should be opened. If you touch a closed seat (the Occupancy indicator is on) and deodorization
operate and unintentionally press the Rear Showering / Front Showering button, water will come out and spray on
yourself.
16
Nozzle Cleaning / Deodorization filter
again or press
Nozzle Cleaning
for more than 2 seconds.
Tips
again for
If the function is used on a regular basis, the surface
around the holes of the nozzle can be kept clean.
However, frequent use of the function is not necessary.
It is recommended that the cleaning operation is carried
out every 5 days.
It is recommended that the nozzle is cleaned when the
product is used less frequently.
Hole
Hole
Spray nozzle
Bidet nozzle

Advertisement

Table of Contents
loading

Table of Contents