Panasonic DL-EH30SE-W Operation Instructions Manual page 4

Safety Precaution
Risk of Water Leak
When assembling or disassembling the bidet
body, do not exert any force on the water inlet
hose.
The new hose-sets supplied with the appliance
are to be used and old hose-sets should not be
reused.
(Otherwise, a water leak from any loosened nut on
the shunt valve or quick fastener on the body
connection side may be incurred.)
Close the water inlet valve before removing
the inlet filter.
(Otherwise, a water leak may be incurred.)
Once the inlet filter is removed, make sure to
tighten it during re-installation.
(Otherwise, a water leak may be incurred.)
Inlet filter
4
must be followed
CAUTION
Closed
Risk of Electric Shock
Do not insert any metal object into the
opening.
(Risk of electric shock)
Verify the operation of the leakage protector.
( If the product is used when
the leakage protector is
broken, the risk of electric
shock may be resulted from
any electrical leakage.)
[Page 22]
→ When a fault occurs, consult your dealer or one of
Panasonic operated service centers.
Electrical leakage
test button