Safety Precaution - Panasonic DL-EH30SE-W Operation Instructions Manual

Electric bidet seat (household use)
Hide thumbs Also See for DL-EH30SE-W:
Table of Contents

Advertisement

Safety Precaution

To prevent any personal hazard or property damage, make sure to follow the instructions below.
The hazard or damage caused by misuse can be categorized by the following degrees.
WARNING
Risk of Fire or
Electric Shock
Do not use the power cord and plug
incorrectly.
● Do not damage, machine, bend, twist,
stretch or bind the power cord and
plug by force, expose them to
extreme temperature, or place heavy
objects on them.
→When the power cord and plug require
services, contact your dealer or one of
Panasonic - operated service centers.
● Do not plug or unplug the power plug
with wet hands.
● If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent similarly qualified persons
in order to avoid a hazard.
Do use the power cord and plug properly.
(Otherwise, fire or electric shock may be incurred.)
● Make sure to follow the range of the
wall outlet's and connection
apparatus' ratings. Only use 220-230 V
AC power.
● Plug the power plug all the way in.
● When removing the power plug,
hold the plug body. (Do not pull the
power cord.)
● Make sure to wipe off any dust on the
power plug regularly.
Do not spray any water or cleaning agent
on the electric bidet seat or power plug.
(Otherwise, electric shock or fire resulted from short
circuit may be incurred.)
2
must be followed
indicates a potential hazardous situation where death or severe
injury may be suffered if not avoided.
WARNING
Do not connect any water pipe
other than the pipe for tap water.
(Risk of cystitis or dermatitis)
(Risk of water leak due to corrosion or attached foreign objects)
Do not supply power
to the product by any
external switch.
In order to avoid a hazard due
to inadvertent resetting of the
thermal cut-out, this appliance
must not be supplied through
an external switching device,
such as a timer, or connected
to a circuit that is regularly
switched on and off by the
utility.
Industrial or well water
Make sure to make the
ground connection.
[Example of ground wire connection]
(Risk of electric shock may be
incurred in the event of any fault
and electrical leakage if not
grounded.)
→Please consult a professional for
the ground connection.

Advertisement

Table of Contents
loading

Table of Contents