Table of Contents
Advertisement
Saving memory contents/leave memory
Open individual memory
Deleting a stitch/letter within a
memory
· place the cursor to the right of the
stitch to be deleted
· touch del
· the stitch to the left of the cursor is
deleted
Inserting a stitch in memory
· place cursor where the stitch is to
be inserted
· select stitch/letter
· the new stitch is inserted to the left
of the cursor
Save and leave memory
· touch store
· the contents are saved
· the memory can be opened and
viewed at any time
· touch external mem button
Returning to a previously
programmed memory bank
· open memory by pressing the
external mem button
· touch mem 1 on the functions
toolbar
Note: if the machine has been
turned off since the last time the
memory feature was used, mem 1
will show on the screen when the
memory is activated. If the machine
has not been turned off, the last
memory bank opened will show.
· an overview of the memory banks
appear on the screen
· the open memory bank is
highlighted (dark gray)
· the occupied memory banks are
displayed in light gray
Memory
Turning off machine without saving
· memory contents will be lost if the
machine is turned off without
touching store
· empty memory banks are shown in
white
· memory banks can be scrolled if
more than 15 are occupied (can be
up to 255 memory banks)
· select an occupied memory bank
· the contents are shown in the
memory bar
· touch esc to return to the previous
screen
· the contents of the selected
memory remain active
· you can sew, insert, or correct
these contents
Note:
Contents of memory should be
sewn from a stitch screen, not the
memory storage screen.
43
Advertisement
Table of Contents
