Table of Contents
Advertisement
40
Memory
Open Memory
Programming stitches
Open Memory
· press the external mem button
· the memory bar appears on the
screen
· the third row of stitches disappears
from the screen
· scroll up and down to view these
and further stitches
· the cursor appears as a vertical line
in the memory bar
· all changes (programming,
inserting functions, corrections)
affect the character to the left of
the cursor
Programming
· select the desired stitch
· make any desired adjustments to
stitch width, stitch length, and
needle position
· open the memory by pressing the
external mem button
· touch mem 1 to access the memory
storage screen
Continue programming
· select the next desired stitch
· the stitch appears in the mem field
· continue in this manner
· start sewing; when the foot control
is pressed, the cursor will go to the
beginning of the stitch combination
for sewing the complete grouping
Scroll memory
· scroll arrows are to the right and
left of the memory bar
· touch to view the programmed
contents either forward or
backward
· to close the memory, press the
external memory button
· the function toolbar at the bottom
of the screen changes automatically
to include those functions appro-
priate for memory
· the opened memory bank is
indicated by its number in the
bottom bar
Note:
If the machine has been turned off
since the last time the memory
feature was used, mem 1 will show
on the screen when the memory is
activated. If the machine has not
been turned off, the last memory
bank opened will show
· select an empty memory bank
· touch OK to return to the previous
screen
· select the desired stitch
· the stitch appears in the mem field
· the cursor moves to the right as
stitches are selected
Note:
If the contents of the memory have
been changed using the edit function
(page 41), the Pattern begin function
must be selected to start the
stitching at the beginning of the
combination.
· use Pattern end to stop auto-
matically:
Toolbar function – Pattern end will
stop after the selected number of
combinations have been stitched
External button –Single pattern will
stop after stitching the stitch
pattern to the left of the cursor
· to save, touch store
· store will blink once to indicate it is
saving
· if the stitch combination has not
been saved, a message screen will
appear asking if you would like to
save it
Advertisement
Table of Contents
