Table of Contents
Advertisement
Programming stitches by number
Editing memory contents
Stitches by number
· open memory
· touch function 0–9
· numbers appear on the screen
· the memory bar remains visible
· touch numbers to select stitch
· the number selected appears above
the other numbers
Confirm and continue programming
· touch OK to confirm
· the stitch selected appears in the
memory bar
· touch store to save in memory
· select the next stitch by pressing
the appropriate number and
proceed as above
Back to stitch screen
· touch esc
· the screen reverts to the stitch
screen which includes the selected
stitch
· the selected stitch is activated
(highlighted)
Stitches with functions
· stitches can be modified after being
programmed into memory
· program the first two stitches
normally
· touch edit
· all available functions appear in the
top right section of the screen
· the last stitch in memory (left of
cursor) appears above the editing
functions
Inserting functions, e.g. mirror image
· place the cursor to the right of the
stitch to which mirror image is to
be applied
· touch edit
· select mirror image in the functions
screen
· the stitch will be shown in mirror
image
Memory
Correct
· touch del in the upper right corner
to change the stitch number
· the cursor moves to the left and
deletes the number
· select new number
· touch del in the lower toolbar to
delete a programmed stitch
· the stitch to the left of the cursor
will be deleted
· the same procedure for insertion
applies to all functions
· touch edit to close
41
Advertisement
Table of Contents
