Table of Contents
Advertisement
Ethernet model
(b)
(a)
(c)
(d)
(e)
(f)
Symbol
Name
(a)
Plug-in option connector 1
(b)
Plug-in option connector 3
(c)
Plug-in option connector 2
Voltage/current input switch
(d)
(SW2)
Ethernet communication
(e)
connector
(f)
Control circuit terminal block Connects cables for the control circuit.
(g)
PU connector
(h)
USB A connector
(i)
USB mini B connector
(j)
Upper front cover
(k)
Power lamp
(l)
Alarm lamp
(m)
Charge lamp
(n)
Operation panel (FR-DU08)
(o)
Lower front cover
(p)
Main circuit terminal block
(q)
Cooling fan
Switches for safety sub-
(r)
functions (SW3 and SW4)
*1
For details on how to remove the Ethernet board, refer to the Ethernet Function Manual.
*2
Refer to the Instruction Manual (Detailed).
16
1. INTRODUCTION
1.2 Inverter component names
(j)
(k)
(l)
(n)
(m)
(o)
Connects a plug-in option or a communication option.
The connector 2 cannot be used because the Ethernet board is installed in the initial
status. The Ethernet board must be removed to install a plug-in option to the
connector 2. (However, Ethernet communication is disabled in that case.)
Select voltage or current for the input via terminals 2 and 4.
Connect the Ethernet dedicated cable for connection to the network.
Connects the operation panel (FR-DU08) or the parameter unit (FR-PU07). This
connector also enables the RS-485 communication.
Connects a USB memory device.
Connector for a personal computer. Enables communication with FR Configurator2.
Remove this cover for the installation of the product, installation of a plug-in
(communication) option, switching of the voltage/current input switches, etc.
Stays ON while the power is supplied to the control circuit (R1/L11, S1/L21).
Turns ON when the protective function of the inverter is activated.
Stays ON while the power is supplied to the main circuit.
Operates and monitors the inverter.
Remove this cover for wiring.
Connects cables for the main circuit.
Cools the inverter.
Do not change the initial setting (ON
(g)
(h)
(i)
(r)
Description
OFF
).
ON
(q)
(p)
Refer to page
Instruction
Manual of the
option
*1
*2
64
48
63
65
65
25
43
100
43
*2
25
42
111
—
Advertisement
Table of Contents
