Table of Contents
Advertisement
• Two hard disks can be connected to each connector. The first HDD is referred to as the
"Master" and the second HDD is referred to as the "Slave".
• For performance issues, we strongly suggest you don't install a CD-ROM or DVD-ROM
drive on the same IDE channel as a hard disk. Otherwise, the system performance on this
channel may drop.
(9)
Serial-ATAII
SATAII3/SATAII4/SATAII5/SATAII6
This connector supports the provided Serial ATA2 IDE hard disk cable to connecting the
motherboard and serial ATAII hard disk.
2-6-2 Headers
(1) Line-Out/MIC Header for Front Panel (9-pin): AUDIO
This header connects to Front Panel Line-out, MIC connector with cable.
(2) USB Port Headers (9-pin) :
These headers are used for connecting the additional USB port plug. By attaching an
option USB cable, your can be provided with two additional USB plugs affixed to the
back panel.
Port
connector:
SATA1
SATA3
SATA5
Serial-ATA2 Port Connector
AUDIO
Pin 1
Line-Out, MIC Headers
15
SATAII1
SATA2
SATA4
SATA6
2
10
9
USB1/USB2/USB3
/
SATAII2/
Advertisement
Table of Contents
