3. Install the
Side
cover.
4. Follow the procedure in
Hard drive
Removing the hard drive
NOTE:
For configurations shipped with 3.5-inch HDD, follow the same procedure to remove the HDD from its bracket.
1. Follow the procedure in
2. Remove the:
a)
Side cover
b)
hard drive assembly
3. Flex the hard drive bracket [1], lift the hard drive [2], and then slide out from the hard drive bracket [3].
NOTE:
Follow the same procedure to remove another 2.5-inch hard drive on the other side of the bracket.
72
Removing and installing components
After working inside your
computer.
Before working inside your
computer.
'
Need help?
Do you have a question about the OptiPlex 3070 Small Form Factor and is the answer not in the manual?
Questions and answers