3. Install the:
a)
Hard drive and optical drive module
b)
HDD assembly
c)
Front bezel
d)
Side cover
4. Follow the procedure in
System board
Removing system board
1. Follow the procedure in
2. Remove the:
a)
Side cover
b)
Coin cell
c)
Front bezel
d)
HDD assembly
e)
Hard drive and optical drive module
f)
Heatsink assembly
g)
Processor
h)
Memory module
i)
M.2 PCIe SSD
3. Disconnect the following cables:
a) Intrusion switch
b) Power switch
4. To remove the I/O panel:
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
59
Need help?
Do you have a question about the OptiPlex 3070 Small Form Factor and is the answer not in the manual?
Questions and answers