Power Switch; Removing Power Switch - Dell OptiPlex 3070 Small Form Factor Service Manual

3. Install the:
a) Heat sink assembly
b) Hard drive and optical drive module
c) HDD assembly
d) Front bezel
e) Side cover
4. Follow the procedure in

Power switch

Removing power switch

1. Follow the procedure in
2. Remove the:
a) Side cover
b) Front bezel
c) HDD assembly
d) Hard drive and optical drive module
3. To remove the power switch:
a) Disconnect the power switch cable from the system board [1].
b) Press the power switch retention tabs and pull the power switch out from the system [2] [3].
After working inside your computer.
Before working inside your computer.
Removing and installing components 95