Getting Help - ZyXEL Communications GS-2724 User Manual

Table 87 Command Interpreter Mode Summary (continued)
.
MODE DESCRIPTION
Command modes that follow are sub-modes of the config mode and can only be accessed from within the config
mode.
Config-vlan This is a sub-mode of the config mode
and allows you to configure VLAN
settings.
Config-interface This is a sub-mode of the config mode
and allows you to configure port
related settings.
Config-mvr This is a sub-mode of the config mode
and allows you to configure multicast
VLAN settings.
Enter to quit from the current mode or enter
exit

38.8 Getting Help

The system includes a help facility to provide you with the following information about the
commands:
• List of available commands under a command group.
• Detailed descriptions of the commands.
GS-2724 User's Guide
Chapter 38 Introducing Commands
HOW TO LOGIN/
PROMPT
ACCESS
Type vlan followed
sysname(config-vlan)#
by a number (between
1 to 4094). For
example, vlan 10 to
configure settings for
VLAN 10.
interface
Type
sysname(config-
port-channel
interface)#
followed by a port
number. For example,
nterface port-
i
channel 8 to
configure port 8 on the
Switch.
MVR
To enter mode,
sysname(config-mvr)#
enter mvr followed by
a VLAN ID (between 1
and 4094). For
mvr 2
example, enter
to configure multicast
settings on VLAN 2.
to exit the command interpreter.
logout
233