Troubleshooting - Converters.TV Multi Vision 521 Operation Manual

Q: I connect with a NOTEBOOK PC, no output is displayed on TV.
A: Check your computer hardware operating manual to enable the VGA port or
"OUTPUT".(Many Notebook computers have 3 settings, VGA external only, VGA internal
only, and VGA internal & external simultaneously)
Q: Can I use multiple televisions to view the same image from my computer?
A: Yes, you may connect one television to the next using a composite video cable or an S-
Video between the "VIDEO IN" and "VIDEO OUT" ports. We recommend using no more
than six televisions because of signal degradation.
Trouble Shooting
Check the following before requesting service.
Symptom
1. Check the power cable for proper connection to DC IN or USB
No LED light
port.
1.Press the video select or AV button of the TV to select
No TV output
2.If the signal of the
Text not sharp 1. Use S-Video or SCART connection.
1. If long cable is used to connect the
Ghost image
2. Adjust Sharpness of TV.
1.Set the
Missing characters
2.Adjust horizontal and vertical position button to the center screen.
3.Adjust the H SIZE and V SIZE.
Flicker
1. Adjust the Flicker or V SIZE of the
Point to check
PC to TV Converter - Multi
the video Input from the
Vision
.
PC to TV Converter - Multi Vision
through a VCR first, set the input option to external video for the
VCR.
Multi Vision
to a TV, use a better 75 ohm coaxial cable. (RG-
59 is recommended)
PC to TV Converter - Multi Vision
goes
PC to TV Converter -
to underscan.
PC VGA to TV Video