Converters.TV Multi Vision 521 Operation Manual page 2

Introduction
Features
Modes and
Resolution Table:
PC to TV Converter - Multi Vision allows you to view computer images
on a Standard, High Definition or Progressive Scan TV display, and
features simultaneous display on TV and monitor. It is a Plug and
Display device, and is powered from your PC's USB or PS/2 port.
Most standard TV, HDTV, Progressive Scan TV's and most DVD, VCR
and Projector devices are compatible with the PC to TV Converter -
Multi Vision. The unit allows multiple output device connections to TV
displays, Video Projectors, VCR and DVD recorders supporting
Composite & S-Video, RGB (Scart) and Component (Y/Cb/Cr) Video
signal formats.
The PC to TV Converter - Multi Vision features simultaneous display on
TV and PC Monitor, and supports resolutions up to and including
UXGA (1600x1200). The unit is very versatile, and supports both IBM
and Macintosh computers.
1. Remote Control with full interface to the Converter.
2. IBM PC & Macintosh PC compatible.
3. support for Video or S-Video or RGB and Component Y/Cb/Cr, all
outputs switch selectable.
4. Compatible with Standard TV, HDTV and Progressive Scan TV.
5. Simultaneous display on TV and PC Monitor.
6. Supports Resolution up to UXGA (1600x1200)
7. Button selection for System Type, OSD Menu, Zoom In/Out, Fine Tune,
Save Settings and Power On/Off.
8. OSD Menu supports Freeze-frame, Hor. & Ver. Size, Brightness,
Contrast, Hue, Saturation and Flicker functions and adjustments.
This converter supports the following VGA display modes:
720 640
Resolution x
400 480
70
Vertical
60, 70,
Frequency
72, 75,
(Hz)
85, 100,
120
This converter supports the following MAC display modes(for MAC G4,G4 Cubic, G3):
800 1024
x x x
600 768
60, 70,
56, 60,
72,75
70, 72,
75, 85,
100
1152 1280 1280
x x x
864 960 1024
60 60
60, 70,
72,75
1600
x
1200
60