Dot Matrix; Biofeedback; Training Control Via The Storage Media - h/p/cosmos motion stair 600 User Manual

Table of Contents

Advertisement

4.7

DOT Matrix

In the lower half of the LCD display a text guides through the programming menu in the chosen language in
order to ease the programming. Additionally, the wattage and pulse paths are visualized during workouts.The
curve for the wattage is displayed constantly whereas the pulse-curve flashes. The display depends on the
program but pressing the scan button can alternate the display.
List of graphical display options:
Standard – shows an excerpt of the last 5 minutes of the workout.
Overview – shows the complete workout up to 50 minutes
Figures – super size display of wattage and pulse
Profile – shows the impact profiles
Zone – display especially designed for the pulse-dominated programs. Here, the target heart rate is
shown together with the actual heart rate
Test – This option visualizes the pulse movements during the test and shows the heart rate actually
reached at the end of the test.
Pulse – the actual signals are shown like an oscillograph.
4.8

Biofeedback

The Biofeedback function enables the user to get information through a colour indication he is training
according to the specifications. The background colour blue informs that one isn´t training in the optimal range.
It´s possible that one is still warming up or training with too little rpm/heart rate.
The background colour green shows that the user is training in the optimal training range.
Red informs that target values are undershot or exceeded. In the pulse controlled workouts the load will get
reduced if the target heart rate gets exceeded. In other programs the rpm can be the value that the colours
refer to.
Fig.4: Multicolor backlight function for a visual indication of workout target.
4.9

Training Control via the storage media

The storage media has a standard fitting in all units of the cardio line. Workout control via the storage media is
a means of easing the handling of the unit. The storage media system supports the user in all aspects of training
activities.
The system consists of a monitor unit with the storage media reader. The slot used to enter the media is located
on the right side of the monitor casing. An acoustical signal proves the acceptance of the storage media. The
storage media system makes training with all units of the cardio line easier and more efficient. The
programming of the media can be done directly on the ergometer. The results will then only be shown in the
unit display.
The planning of training can alternatively be done with PC Software. If the software is used, the individual
training programs are transferred to the storage media. All results are saved on the storage media and can be
analysed on the PC after the results have been transferred.
Optionally the usage of the unit can get restricted to storage media use only. This function can get chosen in
the secret menu with the following alternatives: Usage solely with storage media; if not using a storage media
solely the Quick Start program is possible; usage with and without storage media possible. The default value is
using the machine with and without storage media. Please contact your dealer for necessary settings in case you
want to restrict the usage of the machines.
Programming Training Schedules manually onto the member media
One must get onto the ergometer and begin pedalling or activate the display by pressing any button.
The individual data for the desired program has to be entered manually on the monitor. The program
then starts.
The trainer media is entered into the slot once the display shows GO until an acoustical signal indicates
that the media has been recognized.
The member media gets inserted. Now the maximum number of workouts (1-255) can get chosen.
Confirm with ENTER. When the acoustic signal rings out, the data has been saved and the member card
is functioning. Selecting 255 workouts equals no limit.
/H-p-cosmos.local/dfs/erp$/article/cos30021ef-med600/manual/EN/20170926_cos30033ef-med600-ef-600_torqualizer_stair_instructions_for_use_EN.pdf
User manual motion stair 600 med/600
Page 8 of 19
Version 3.0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Motion stair 600 med

Table of Contents