Overview Display / Button Functions - h/p/cosmos motion stair 600 User Manual

4.2

Overview Display / Button Functions

Reset
button
Smart Key
buttons
Clockwise explanation of the buttons, starting with the Stop button:

The STOP button stops the workout and activates the electronic brake, which will generate a maximum
workload for 8 seconds to bring the movement to a halt. After that, the COOL function can be used to
conduct a cool down with low intensity.

The PROG button must be pressed to start the selection of programs available – solely if no storage
media is used.

The Cool button stops the workout before the end of the chosen program, begins with the cool down
mode and finishes the workout with a low intensity. The workout data is shown and saved on the
storage media, if the workout has been started using a storage media.

The Scan button changes the display mode, parameters, or graphical displays within the Dot Matrix on
the monitor.

The Smart Key buttons function as shown in the Dot Matrix area of the monitor according to the
situational need.

Reset button – Initially, the Reset button is not visible for the user. It is hidden in the extension of the
smart key buttons at the upper edge of the LCD-display. If the system should operate faulty, the reset
button gives you the option to restart the processor. This is only possible if no activity is being conducted
on the unit, meaning zero revolutions.

The + button increases value of the parameters.

By using the Enter button, values of parameters or display modes are selected.

The - button decreases the value of the parameters.
/H-p-cosmos.local/dfs/erp$/article/cos30021ef-med600/manual/EN/20170926_cos30033ef-med600-ef-600_torqualizer_stair_instructions_for_use_EN.pdf
Fig. 2: Monitor view for explanation of button functions
User manual motion stair 600 med/600
Page 6 of 19
Version 3.0