LG R5-MAX Owner's Manual page 12

BEFORE USING
12
6
Connect the adapter to a wall outlet.
NOTE
• If two robot cleaners are used together, there
should be at least 1.5 m distance between home
stations.
- If the home stations are too close together,
the robot cleaner may not be able to return to
its home station.
• Do not install the home station on a carpet.
Charging the Robot Cleaner
Always keep the power plug of the home station
connected to an electrical outlet. The robot cleaner
can find the home station to charge only when
power is supplied to the home station.
1
Turning on the Power Supply. Turn the main
power switch ON
cleaner to turn on the power supply.
2
Place the robot cleaner on the home station,
align the centre of the robot cleaner with the
at the back of the robot
a
centre of the home station and push the robot
cleaner from behind.
• When the white indicator on the home
station goes off, charging will begin.
• The robot cleaner returns to the home
station on its own to charge the battery
when cleaning is finished or battery
becomes low. If the robot cleaner returns to
the home station due to low battery, it will
resume cleaning after the battery is fully
charged.
NOTE
• The battery is a consumable. The battery life and
service life will decrease based on the years of
usage and hours of use.
• If the robot cleaner cannot be charged normally,
check if the charging terminals are
contaminated by a foreign substance, and clean
the home station with a dry towel.
• If charging is still not available after cleaning,
check if the home station and the adapter are
connected properly.
• Fully charge the battery every 6 months when
not using the robot cleaner or keep it in storage
for a long time.
- Storing the battery for a long period of time
without charging may cause battery failure.
• When the main power switch is turned off, the
battery % display in the ThinQ app does not