Table of Contents
Advertisement
performance filter material and make it
ineffective.)
5
Reassemble the air-dried water tank, dustbin
and filter, and install them back into the robot.
Cleaning the Brush
1
Take out the brush cover and brush.
2
Clean the brush with a cleaning tool. The blade
can cut off the hair entangled on the brush.
3
Remove the roller at one end of the brush and
clean the hair entangled on the roller.
4
After cleaning, re-install the brush in place.
Cleaning the Side Brush
1
Remove side brush, clear it of hair or foreign
matters, and decide whether to use a wet cloth
based on your personal needs.
2
Re-install the side brush and press it tightly to
ensure it is installed in place.
MAINTENANCE
21
Advertisement
Table of Contents
