Emerson FB2100 Instruction Manual page 98

FB2100 Flow Computer Instruction Manual
D301783X012
November 2023
84
Note
When using the IR buttons, aim your finger at the round spot just below the arrow.
Table 4-1. Infrared (IR) Buttons on HMI Module
Button Mode
Screen Saver
OR
Data Entry
Idle Mode
Screen Saver
Data Entry
Data Entry
Symbol(s) representing the status of a value may appear in the upper right of the
display, next to the description. Multiple symbols may display. If there are no data
quality issues, no symbols display.
Table 4-2. Symbols on Display
Symbol Explanation
Alarm - The parameter value shown is in an alarm state (High Alarm,
Low Alarm, etc.)
Override - The parameter value shown is in override mode (i.e. a user
entered fixed value)
Fault - The parameter value shown is somehow invalid
Unverified - For parameter values that require additional validation
(beyond simple database min/max range checking, the parameter
value shown has not yet been validated by the firmware).
Use
Tap once to move up or down one

item through list of parameters.
Hold to stay on current parameter.

Tap (UP) once to move the cursor to

the previous character in the list or
(DOWN) once to move the cursor to
the next character in the list.
Hold (UP) or (DOWN) to scroll more

quickly through the character list.
Hold to wake the display (if screen is off)
Log out (if logged on)
Tap once to move the cursor to the

left.
Hold to perform action shown on

screen (such as "Hold to Accept")
Tap once to move the cursor to the

right.
Hold to perform action shown on

screen (such as "Hold to Cancel")
Operation