4.
5.
6.
Service and Troubleshooting
Figure 5-20.
Coin Cell Battery Removal/Replacement
Insert the new coin cell battery in the slot. The negative side (shiny side with no
writing on it) must be facing outwards (towards where the CPU enclosure cover
would be).
CAUTION
When inserting the SRAM coin cell battery, push the battery gently into its slot
until it stops. The battery should slide in easily. Do not use excessive force.
Reattach the cover of the CPU enclosure.
Close the enclosure.
FB2100 Flow Computer Instruction Manual
D301783X012
November 2023
103