Related Manuals for RASOR NERAPRO
Summary of Contents for RASOR NERAPRO
- Page 1 CORDLESS ELECTRIC CUTTER NERAPRO USE AND MAINTENANCE INSTRUCTIONS Please read this manual carefully before using the device and keep it safe with the product. TRANSLATION OF ORIGINAL AND COMPLETE INSTRUCTIONS...
-
Page 2: Table Of Contents
RASOR ELETTROMECCANICA S.r.l. Via Giannetto Mattei, 41/43 - 20044 Arese- (MI) - ITALY Model: NERAPRO Rasor Elettromeccanica s.r.l. declares, under its own respon- sibility, that the aforementioned products, to which this decla- ration refers, comply with the Directives on the approximation of the laws of EEC member states relating to: –... -
Page 3: General Information
– Reproduction, in whole or in part, of the illustra- the normal work cycle. tions or text given in these instructions is prohibited. Materials must be perfectly dry when using the product. Rasor Elettromeccanica S.r.l. reserves the right to amend the documentation without prior notice. CAUTION HAZARD CAUTION HAZARD... -
Page 4: Prohibitions
A nameplate (1) stating the product data is applied to the operation. NERAPRO. Ensure the nameplate has been applied to the pro- The product must be used solely for its intended purpose. Any duct; if not, inform the manufacturer and/or retailer immediately. -
Page 5: Package Contents
– in the presence of fine dust or corrosive gases; – for cutting plastic, metal or wood materials. Any use of the NERAPRO cordless electric cutter for pur- poses other than those indicated above is prohibited and constitutes a hazard. -
Page 6: Use
– To cut neatly along a pre-marked line, we recommend using the tip (1) as a guide. WARNINGS Apply pressure uniformly to the cordless electric cutter. CAUTION Only ever use the charger supplied (100-240VAC, 50/60 Hz, 0.4A max - Output: 4.2V, 2A). https://www.rasor-cutters.com... -
Page 7: Maintenance
(supplied). Turn the cap (1) a few times to screw it back on. Tighten the cap (1) by a few turns every day the cutter is used. CAUTION The blade must never be dirty with grease or oil. https://www.rasor-cutters.com... -
Page 8: Available Blades
Make sure the blade is centred on the gear in the correct position. Fit the blade with the sharp side (the side with the word Rasor on it) facing outwards away from the cutter;... -
Page 9: Troubleshooting
Check the batteries are inserted correctly The cutter is slow to start, works on and off, or does not start Check the plastic joint is integral Check the battery charge level WARNINGS Contact the retailer for problems not included in this table https://www.rasor-cutters.com... -
Page 10: Spare Parts
COMPLETE SET OF NERA ACCESSORIES CODE DESCRIPTION ® BAT36 3.7V, 2400 mA Li-Ion BATTERY DK36 DOCKING STATION CH36 100-240 V CHARGER EU PLUG CH3601 100-240 V CHARGER US PLUG WARNINGS For an exploded diagram of spare parts with item codes, visit www.rasor-cutters.com https://www.rasor-cutters.com... -
Page 11: Disposal
– if the cordless electric scissors are used for purposes other than those stated in this manual; CAUTION – if parts other than Rasor® original spare parts are used. Existing local regulations may impose heavy penalties for Repairs made under warranty do not interrupt its duration. - Page 12 RASOR ELETTROMECCANICA SRL Via Giannetto Mattei 41/43 20044 Arese (MI) ∙ Italy ph. +39 02 66 22 12 31 info@rasor-cutters.com www.rasor-cutters.com FOLLOW US: FOLLOW US:...
Need help?
Do you have a question about the NERAPRO and is the answer not in the manual?
Questions and answers