Related Manuals for RASOR NERAPRO
Summary of Contents for RASOR NERAPRO
- Page 1 CORDLESS ELECTRIC CUTTER NERAP USE AND MAINTENANCE INSTRUCTIONS Please read this manual carefully before using the device and keep it safe with the product. TRANSLATION OF ORIGINAL AND COMPLETE INSTRUCTIONS...
-
Page 2: Table Of Contents
RASOR ELETTROMECCANICA S.r.l. Via Giannetto Mattei, 41/43 - 20044 Arese- (MI) - ITALY Model: NERAP Rasor Elettromeccanica s.r.l. declares, under its own respon- sibility, that the aforementioned products, to which this decla- ration refers, comply with the Directives on the approximation of the laws of EEC member states relating to: –... -
Page 3: Caution Hazard
– Cleaning and maintenance intended to be carried out by the user must not be carried out by unsupervised children. – Use only original spare parts supplied by Rasor Elettromeccanica S.r.l. – Any required operation (maintenance or repair) must be... -
Page 4: Prohibitions
Limits of use – use by untrained or unauthorised personnel – damage or defects caused by failure to follow use and All Rasor Elettromeccanica products are tested before being maintenance instructions. shipped to the customer to guarantee safe and long-lasting operation. -
Page 5: Package Contents
15 Top and bottom buttons – if not used for a prolonged period, store the battery with Sharpener button for disconnecting battery approximately 50% charge remaining at a room temperature of 5/10°C – recharge at least every 12 months. https://www.rasor-cutters.com/it/... -
Page 6: Indicates Prohibited Operations
– To cut neatly along a pre-marked line, we recommend using the tip (1) as a guide. WARNINGS CAUTION Apply pressure uniformly to the cordless electric cutter. Only ever use the charger supplied (100-240VAC, 50/60 Hz, 0.4A max - Output: 4.2V, 2A). https://www.rasor-cutters.com... -
Page 7: Maintenance
(supplied). Turn the cap (1) a few times to screw it back on. Tighten the cap (1) by a few turns every day the cutter is used. CAUTION The blade must never be dirty with grease or oil. https://www.rasor-cutters.com/it/... -
Page 8: Available Blades
Make sure the blade is centred on the gear in the correct position. Fit the blade with the sharp side (the side with the word Rasor on it) facing outwards away from the cutter;... -
Page 9: Troubleshooting
Check the batteries are inserted correctly The cutter is slow to start, works on and off, or does not start Check the plastic joint is integral Check the battery charge level WARNINGS Contact the retailer for problems not included in this table https://www.rasor-cutters.com/it/... -
Page 10: Spare Parts
COMPLETE SET OF NERA ACCESSORIES CODE DESCRIPTION ® BAT36 3.7V, 2400 mA Li-Ion BATTERY DK36 DOCKING STATION CH36 100-240 V CHARGER EU PLUG CH3601 100-240 V CHARGER US PLUG WARNINGS For an exploded diagram of spare parts with item codes, visit www.rasor-cutters.com https://www.rasor-cutters.com... -
Page 11: Disposal
Some parts of the product may contain polluting or For information on the start date and duration of Rasor’s war- hazardous substances that, if leaked, could harm the ranty, reference should be made to the provisions of the sell- environment and human health. - Page 12 RASOR ELETTROMECCANICA SRL Via Giannetto Mattei 41/43 20044 Arese (MI) ∙ Italy ph. +39 02 66 22 12 31 info@rasor-cutters.com www.rasor-cutters.com FOLLOW US: FOLLOW US:...
Need help?
Do you have a question about the NERAPRO and is the answer not in the manual?
Questions and answers