Advertisement
Available languages
Available languages
DETECT THE LASER LINE
AUTOMATIC TRACKING FUNCTION
With the help of the tracking function, the inclination or position of the laser plane can be automa-
tically aligned with the laser receiver. Place the laser receiver with the zero mark on a point through
which the laser beam is to pass. The receiver now automatically steers the laser beam to the zero
mark via radio transmission.
The tracking function works in horizontal and vertical mode up to a range of 100 m.
Press and hold the button to switch the automatic tracking function on/off. The selected channel
and the symbol for the switched-on tracking function light up in the display.
The selection of the accuracy level depends on the tracking distance (see Technical Data) and the exter-
nal conditions. (The greater the tracking distance - the more coarse the accuracy level and the l
ess favourable the external conditions - the coarser the accuracy level).
The laser line is above
the „0" position
·
fast short beep
·
the lower yellow
LED lights
=> Move the receiver
up
The laser line is exact-
ly in „0" position
·
long beep
·
the middle green
LED lights
The laser line is below
the „0" position
·
slow short beep
·
the upper red LED
lights
=> Move the receiver
down
EN
17
Advertisement
