EN
Select the receiving accuracy
Press the button to select the accuracy mode requested.
The mode selected will be saved automatically after
3 sec. (fig. on the right)
Set the volume
Press the button short to set the volume requested.
(a beep sounds to confirm)
(fg. on the right)
Switch on/off the lighting
Press the button long to switch on/off the lighting.
Difference indication / unit setting
Press the key to successively set the units
mm / in / in-fraction.
The difference from the 0-position to the laser line
is displayed in the selected unit of measurement.
16
off
medium
Position laser line
0-position
loud