Table of Contents
Advertisement
METIS M308 / M309 / M313 / M316 / M318 / H309 / H316 / H318 (12-pin)
8
SensorFlash Software (Update firmware)
The software SensorFlash is used to update the firmware of Process Sensors pyrometers. Press Firmware
Update H3 / M3 in the Communication/Options tab (see 7.5) to start the software. Each SensorTools software
has integrated the latest firmware files with the release date. In addition, the latest software and firmware re-
leases is available on the home page in the download area under customers at processsensorsir.com
Select the COM port your py-
rometer is connected with and
press "Connect".
The grey status bar shows your
device if connected.
Click "Open Flashfile" to select
and open a new firmware file
Select the new and suitable BIN
file with a double click or with
"Open".
(SensorTools firmware path:
C:\Program Files (x86)\Pro-
cesssensors Corporation\Sen-
sorTools\Firmware).
Now the button "Flash" is avail-
able, press it to start the up-
grade process.
Confirm the safety note.
Important: Do not interrupt the power supply during this process!
The firmware will be flashed
with the new version. Wait until
the progress bar is finished and
the confirmation message (Con-
gratulation) appears.
The device is by pressing "OK"
automatically logged out from SensorFlash, for further use with
SensorTools the pyrometer must be re-connected (see
gram start / Connecting the pyrometer).
7.1
Pro-
57
Advertisement
Table of Contents
Need help?
Do you have a question about the PROCESS SENSORS METIS M308 and is the answer not in the manual?
Questions and answers