General; Information To This Manual; Ce Conformity And Standards; Limitation Of Liability - KPM PROCESS SENSORS METIS M308 User Manual

METIS M308 / M309 / M313 / M316 / M318 / H309 / H316 / H318 (12-pin)
1

General

1.1

Information to this Manual

This manual enables the safe and efficient use of the device. The manual is part of the instrument and should
be kept accessible. Read this manual carefully before operating. For secure working all security notes and op-
eration procedures in this manual are to be followed.
Additionally, the local accident prevention regulations and common safety regulations of the instruments' oper-
ational area are valid. The descriptions may differ from the current delivery status, since the pyrometer is con-
tinuously developed. Illustrations in this manual are for basic understanding and can differ from the actual con-
struction.
1.2

CE Conformity and Standards

The product conforms to the following standards:
CE conformity: DIN EN 61326-1 (electromagnetic compatibility)
Laser safety:
RoHS:
1.3

Limitation of Liability

All information and notes in this manual are made under consideration of valid standards and rules, state of
technology and our expert knowledge. The producer assumes no liability for damages due to:
▪ Non-observance of this manual
▪ Usage out of intended use
▪ Assignment of unskilled personnel
▪ Unauthorized modifications
▪ Technical modifications
▪ Usage of spare parts not approved
The responsibilities of the delivery contract are valid as well as our general terms and conditions and terms of
delivery and the valid statutory rule at date of the conclusion of contract.

1.3.1 Devices with PID controller

The PID controller is designed for temperature control in a variety of applications and has been tested in these
applications over a long period for our satisfaction; especially in fast processes. However, Process Sensors
Corporation doesn't guarantee that the temperature control meets all the desired requirements over all pro-
cesses. Process Sensors Corporation excludes process responsibility.
1.4

Terms of Warranty

A warranty period is 12 months from date of shipment form the Process Sensors facility. The seller will repair
or replace the sensor at its own discretion. Further claims of the buyer against the seller or its agents are ex-
cluded, especially claims for damages that are not incurred in the delivery itself. This shall not apply in cases of
intent, gross negligence, or the absence of assured properties. Damage or misuse of the product will be deter-
mined and void the warranty coverage. Repairs paid by the customer will include a 180 days warranty from
date of shipment. Transportation costs are to be paid by the customer. Any claims for damage caused by mis-
use, neglect or tampering with the sensor are excluded. Process Sensors Corporation does not guarantee that
the software is free from programming errors.
IEC 60825-1, laser class 2 (only devices equipped with laser targeting light)
2011/65/EU
5