Installation
KeepInTouch Card Modem
Installation Procedures
This section describes how to install your Model 3760-B2
KeepInTouch Card modem. Please take a minute to review
these procedures before installing your modem.
Use Figure 2-1 and the following procedures to install your
modem.
1. Locate an unused PCMCIA socket on your PC. Refer to
your PC's user's guide for more information about the
PCMCIA socket.
2. Hold the modem so that the product logo label is facing up,
and the 68-pin connector is facing the PCMCIA socket.
!
CAUTION:
Use care when inserting the modem into the socket.
Do not force the modem, as that may damage the pins on
the connector.
Insert the modem into the socket, pushing it all the way in so
that all 68 pins are engaged.
Issue 1 November 1994
2
2-1