Table of Contents
Advertisement
Glossary
autobaud
Modem automatically determines the asynchronous computer
data rate when using AT commands.
B
Bell 103J
An AT&T Bell standard for 300 bps data transmission.
Bell 212A
An AT&T Bell standard for 1200 bps data transmission.
bps
Bits per second. Indicates the speed at which data is transmitted
between devices.
buffer
A storage area used to compensate for differences in data flow
rate when transmitting data from one device to another.
C
CD
Carrier Detect. A signal between the local and remote ends of a
network indicating energy exists on the transmission circuit.
command line
Contains the command(s) instructing the modem to perform a
function. Command lines begin with the AT prefix, and are
executed when you press the Enter key.
GL-2
Issue 1 November 1994
Advertisement
Table of Contents
