Table of Contents
Advertisement
Name (number), function
Operating mode (P00a),
Measured medium property
Unit system (P00d),
Temperature unit
Output function (P01ab),
Application mode
Current output, current output signal
settings:
Echo Selection(P25)
Filling speed (P26)
Adjustable value range
Default value
Selectable values:
− Liquid
− Granular solid
− Two interfacing liquids
Liquid Medium
Selectable values:
− °C
− °F
°C
Selectable values
Metric (EU):
− Distance
− Level
− Volume
− Mass
− Ullage volume
LEVEL
Selectable values:
− Highest amplitude
− First
− Second
− Last
Highest amplitude
0.1...900 m/h (0.33...2950 ft/h)
200 m/h (656 ft)
20
www.bindicator.com
Description
The basic characteristic of the
measured medium is set here. The
measuring capabilities of the device
vary significantly depending on this
characteristic of the medium (see
specification).
MAIN MENU / BASIC SETUP /
APPLICATION
The unit of temperature
measurement is selected here.
MAIN MENU / BASIC SETUP /
UNITS / ENGINEERING UNITS /
TEMPERATURE UNITS
Set the physical quantity for the
transmitted meter. The device
measures distance. The other
quantities are calculated based on
the specified tank parameters and
material characteristics.
MAIN MENU / MEASUREMENT
CONFIG / PV. MODE
Selects the current loop output
mode when transmitting current.
In "Auto" mode, the output current
changes proportionally to the
PV (4... 20 mA). In the case of
"Manual," the constant current set
in the parameter P08 is forced to
the current output mainly for testing
purposes.
MAIN MENU / OUTPUT SETUP
/ ANALOG OUTPUT / CURRENT
MODE
In problematic cases, it is possible to
choose between the echoes created
during the measurement in order to
ensure a stable measurement and
transmission.
SAP–300: no adjustment available
The maximum rate of rise in the tank
during filling. Entering it correctly
increases the reliability of the
measurement during charging.
SAP–300: no adjustment available
TDR180003 Rev. I
Advertisement
Table of Contents
