Assembly Steps - True FS-100-35 Owner's Manual

ASSEMBLY STEPS

Step 1—Attach Frame Assembly
Tools Used in this Step
#2 Phillips
Screwdriver
9/16" Socket
Wrench
A. Using a #2 Phillips screwdriver and a 9/16" socket wrench, attach the side panel shrouds to the left and right base
frames using 4 bolts, 4 lock washers, 4 fl at washers, 8 screws, and 8 smaller fl at washers, but do not tighten.
B. Using a #2 Phillips screwdriver, attach the left and right side frames to the side panel shrouds using 8 screws and 8
fl at washers, but do not tighten.
IMPORTANT! DO NOT fully tighten the hardware until step 2.
20
Parts Used in this Step
Item Part
1 FS100-
BFR000X-35
2 FS100-
MFR000-35
3 FS100-
SHD001-35
4 C 907
5 C 900A
6 C 445
7 C 749
8 C 754C
5
4
6
7
8
5
4
Description
SUBASSEMBLY, BASE FRAME ASSEMBLY
WELDMENT, SIDE FRAME
SHROUD, SIDE PANEL, METAL
SCREW, 10-32 X 1/2", PAN HD. PHILLIPS, ZP
WASHER, FLAT, #10 USS
HH SCREW, 3/8"-16, 1"
WASHER, LOCK, 3/8", ZP
WASHER, FLAT, 3/8" SAE, ZP
3
Qty
16
16
2
1
2
2
4
4
4
4