Assembly Steps - True SPL0300 Owner's Manual

ASSEMBLY STEPS

STEP 1—ATTACH CROSS BRACE TO MAIN FRAME ASSEMBLY
NOTE: Supplemental assembly video available on vimeo.com: https://vimeo.com/723461257?share=copy.
TOOL NEEDED
Allen Wrench
a. Using an allen wrench, remove the 2 hex screws, 2 lock washers, and 2 bolt caps from the cross brace.
b. Align the cross brace with the main frame assembly. Using an allen wrench, attach the cross brace to the main frame
assembly using the 2 hex screws, 2 lock washers, and 2 bolt caps you removed previously.
IMPORTANT! DO NOT fully tighten the hardware until step 2.
5
4
ITEM
PART
1 SPL-03-CBR000
2 SPL-03-MFR000X
3 C1256
4 C 749B
5 SPL-00-CAP007
3
1
DESCRIPTION
WELDMENT, CROSS BRACE
MAIN FRAME ASSEMBLY
LPSHCS, 3/8"-16 X 1" E-COAT
LOCK WASHER, 3/8", BLK ZP
ARM BOLT CAP
QTY
1
1
2
2
2
2
17