Page 2
TRUE experience. Innovation across the full product line has made TRUE successful and is a trademark of the TRUE heritage. TRUE’s patented Heart Rate Control technology is just one of the remarkable ways we deliver simple and superior performance every user can enjoy, and most importantly, use to achieve personal health and fitness goals.
9. If the machine appears damaged or inoperable, contact a facility staff member to place an “OUT OF ORDER, DO NOT USE” sign on the machine until it is repaired. Only use TRUE supplied replacement components to service this machine.
Page 5
3. Install this piece of equipment on a solid level surface that does not deviate more then 1/8” over a 10’ distance (or as defined and required by local building and architectural codes. 4. TRUE strongly recommends that all equipment be anchored to the floor to prevent movement and increase stability.
Page 6
• Frames and Lifting Arms: Inspect weekly for integrity and function. Replace any component at first signs of wear. Use only TRUE supplied components. 4. Replace any warning label at first sign of wear. Labels and the Facility Safety Sign may be obtained from TRUE free of charge.
Be sure all hardware is tight before using the machine. Retain these instructions for future reference. If you have any questions, do not hesitate to contact your TRUE dealer or TRUE Fitness Corp. at (800) 883-8783 or service@truefitness.com.
SSEMBLY Required Tools: • (2) 14mm [9/16”] wrenches or Socket With Ratchet Handle • 4mm [5/32”] allen hex wrench • 5.5mm [7/32]” allen hex wrench Assemble the frame members loosely at first. Tighten the bolts, a little at a time, in a sequence.
Page 10
SSEMBLY • Remove the adjusment tube retaining screw from the main frame. • Pull the pop pin and insert the THIGH PAD FRAME ASSEMBLY. • Reinstall the retaining screw. • Assemble the foot plates ADJUSTMENT TUBE RETAINING SCREW...
INAL HECK • Verify that the HIP PAD flips into the proper position as shown for each exercise. • Verify that the THIGH PAD FRAME can be adjusted into each position and that the pop pin is fully engaged in each position. •...
ARNING ABELS The following are the warning labels required for this product. If any of these labels are missing or become damaged contact TRUE. Note: these labels are not to scale. B2065 LBL-WRN-0016 LBL-PR-FS22A LBL-PR-FS22C LBL-PR-FS22B...
Page 18
Hours of operation 8:30am - 5:00 pm CST workmanship for a 10 years. The frame is warranted for labor and freight (for parts shipped from TRUE) for one year from date of purchase. * This limited warranty on structural frame does not include paint or coatings.
Page 19
(if anyone other than a TRUE authorized dealer/ technician initially assembles and installs the Product, this The FS-22 comes with one serial number on the base of the Limited Warranty will be void unless the written authorization machine. Please write down your serial number below and keep of TRUE is first obtained).
Page 20
If you prefer to mail your warranty card, have the owner of the product complete the information below and return it to TRUE Fitness within 30 days from the date of equipment installation.