Practical Tips - Cleaning - Specialized TURBO CREO 2 Workbook

G U I D E L I N E S & T I P S

Practical Tips - Cleaning

This video will guide you through some key principles when washing Turbo bikes.
y Always turn the bicycle off before cleaning
y Remove the Range Extender battery and all other accessories
y Ensure the charge port cover is closed
y Never use a high-pressure cleaner or high-pressure hose when cleaning your Turbo bike
y Best practice is to use a bucket of water with a wet cloth or a sponge
y Never point water directly at sensitive areas such as the drivetrain, suspension parts, the dropper post, all
bearings and seals, the motor area, batteries, displays and all electronic connectors
y Regularly clean the magnet on the rear wheel with a cloth. Brake dust with metal parts can collect and cause
issues
y Clean the Range Extender battery and cable with a soft, damp cloth
y For instructions on how to clean third party components, refer to the respective manufacturer's instructions
y Allow more sensitive areas to dry out (e.g. leave the charge port door open over night)
y Make sure the charge port is free from water and/or dirt - if contaminated, remove contamination with low air
pressure or a soft brush
y Clean and relube the drive train system, using a lint-free rag and high-quality chain oil. Ideally, you do this
before/after each ride
y For instructions on how to maintain third party components, refer to the respective manufacturer's instructions
WA S H I N G V I D E O
C H E C K -S T E P S B E FO R E C L E A N I N G
WA S H I N G & C L E A N I N G R U L E S
A F T E R WA S H I N G / B E FO R E B I K E U S E
57