Paradyne HotWire 7985 User Manual page 121

N
navigating the screens, 2-6
Net Margin Threshold, status message, 4-3
network
interface options, A-2
tests, 5-2
Network DSL Failed, self-test result, 4-4
network interface, pin assignments, C-2– C-12
network interface options, A-2
Network-Initiated DCLB, A-5
NMS, SNMP connectivity, 8-1
no test active status message, 4-5
O
OK, LED, 4-10
OOF (Out Of Frame), status message, 4-3
options, configuration tables, A-1
overview
Termination Unit, 1-2
user's guide, v
P
part numbers, D-1
Passed, self-test result, 4-4
Payload Rate, A-4
PC
connecting, 3-3
requirements, 3-3
Peer IP Address, A-3
performance statistics, 4-8
physical environment requirements, D-1
pin assignments, C-1
port, COM, C-3
Port Status, A-4
power cord installation, 3-2
power requirements, D-1
power supply
ac transformer, 3-2
optional dc, 3-2– 3-18
7985-A2-GB20-00
R
Rear Panel, 1-4
related documents, vi
remote send line loopback, 5-5
repeater loopback (RLB), 5-4
resetting
the access unit, COM port, 7-4
the unit, default configuration options, 7-4
restoring, user interface access, 7-4
RS-449 interface, C-8
S
Save Configuration screen, 3-16
saving option changes, 3-16
screen, function keys, 2-7
screens, for user interface, 2-1– 2-6
SDSL Mode, A-7
security, 7-1
Selectable Payload Rates, 3-9
self-test results, 4-4
Send and Monitor 511, 5-6
Send Ones configuration option, A-5
Send Remote DCLB Loopback, 5-10
size of unit, D-1
SNMP
trap options, 6-2
traps, B-1
start-up, ATI, 2-1
status, test messages, 4-5
subnet, IP addresses, 8-1
Switchpack definitions, 3-8
Switchpack locations, 3-7
Switchpack S1 Definitions, 3-8
Switchpack S2 Definitions, 3-10
SYNC Data Port Tests, 5-7
Sync Port, LEDs, 4-10
SYNC Ports Options, A-4
SYNC Pt Down, status message, 4-3
SYNC Pt Failed, self-test result, 4-4
system, LEDs, 4-10
System Options, A-7
October 1998
Index
IN-3