H Model 7985 Standalone Termination Unit Leds - Paradyne HotWire 7985 User Manual
M/hdsl standalone termination unit with eia 530a interface
Hide thumbs
Also See for HotWire 7985:
- Installation instructions manual (35 pages) ,
- User manual (165 pages) ,
- Installation instructions manual (25 pages)
Table of Contents
Advertisement
Monitoring the Unit
Model 7985 Standalone Termination Unit LEDs
4-10
The following table contains a description of the LEDs on the Model 7985
Standalone Termination Unit front panel.
TM
7985 M/HDSL
TM
Type
LED
SYSTEM
POWER
ALARM
TEST
DSL
DSL
SYNC Port
DTE
October 1998
LED is . . .
Indicating . . .
Green
Unit has power.
Off
No power to the Unit.
Flashing
Unit is in minimum mode and a download is
required.
Red
Device failure, or Power-On Self-Test (POST)
is not complete.
Off
Self-test passed.
Yellow
Loopback test or 511 test pattern in progress.
Yellow,
Self-test in progress.
flashing
Off
No tests.
Green
DSL link is up.
Amber
DSL training in progress.
Amber,
An OOF condition exists.
flashing
Off
The DSL Link is down.
Green
Interchange circuits for the port are in the
correct state to transmit and receive data.
Amber
The port is configured to monitor DTR and/or
RTS and no monitored lead is asserted.
Amber,
The Data Channel or Data Terminal loopback
flashing
is active.
98-16132
7985-A2-GB20-00
Advertisement
Table of Contents
