Paradyne HotWire 7985 User Manual page 83

Configuration Option Tables
Table A-1. Network Interface Options (2 of 2)
Peer IP Address
Possible Settings: 000.000.000.001 – 223.255.255.255, Clear
Default Setting: 000.000.000.001
Specifies the peer IP address for the remote management providing the remote
management link on the DSL loop. This option is only available when the standalone
unit is configured as an LTU.
000.000.000.001 – 223.255.255.255 – Enter an address for the peer unit. The range for
the first byte is 000 to 223, with the exception of 127. The range for the remaining three
bytes is 000 to 255. The peer IP address must be in the same subnet as the MCC
address.
Clear – Clears the IP address field and sets to all zeros.
Circuit Identifier
Possible Settings: [ASCII Text], Clear
Default Setting: [blank]
Uniquely identifies the circuit number of the transmission vendor's DSL line for
troubleshooting purposes.
[ASCII Text] – Enter a maximum of 128 characters. All printable ASCII characters
except ^ (caret) are allowed.
Clear – Clears the field.
7985-A2-GB20-00 October 1998 A-3