Table of Contents
Advertisement
Getting started
1 Pre-flight procedure
1.1 Predefined camera settings
Although the IXUS/ELPH camera can be manually configured, a prede-
fined set of parameters, optimised by senseFly, is saved within the cam-
era as the factory settings.
Note: Image size (Recording pixels or
an aspect ratio of 4:3 in the default factory settings. Only
images taken with these settings can be processed by
Postflight Terra 3D. If you have changed these settings,
you must set them back to the default or carry out a re-
set (See senseFly factory settings).
1.2 Installing the camera
Before every flight, make sure that the battery of your IXUS/ELPH cam-
era is fully charged and its SD memory card contains enough free space.
Next, insert the IXUS/ELPH camera into your eBee, plug it into the con-
nector (see icon
12
) and close the camera compartment's lid.
) is set to L with
Advertisement
Table of Contents
