Before Getting Started - Parrot BEBOP 2 FPV Quick Start Manual

BEFORE GET TING
STARTED
Before use, refer to the Battery section in the
General Information section.
CHARGING THE BAT TERY OF THE
PARROT BEBOP 2
1. Select the plug (provided) for your country and put it
on the charger.
2. Connect the supplied cable to the charger.
3. Connect the battery to the charger's cable, and then
plug the charger into the mains.
The warning light is red while charging and then
turns green when the battery is charged. The battery
charge time is approximately 80 minutes. Flying time is
approximately 30 minutes.
CHARGING THE BAT TERY OF THE
PARROT SKYCONTROLLER 2
1. Take the adapter appropriate to your country and fix
it on the charger.
2. Connect the charger cable to Parrot Skycontroller 2,
then plug the charger into the mains.
11