Table of Contents
Advertisement
Using Still
To view a still picture during playback press the
Start/Stop. Press the Start/Stop button again to
resume playback. If you leave the camcorder in
play/pause mode for more than 5 minutes the
camcorder automatically stops the cassette to pre¬
vent damage to the tape. You can view a still pic¬
ture with less noise on the LCD monitor (Clear
Still).
Note; The still picture
w§ have several noise
bars in the viewfinder
and on the TV, but this
does not indicate a
fault.
Note: If you are freezing a picture with the
LCD monitor closed, then you will not be able
to view a still picture with less noise when you
open the monitor;
■
Using Forward and Reverse Search
When looking for a particular point in your videotape use the FF button and REW button to find the spot
quickly.
When the
LCD
monitor is dosed:
•
Press the FF button during playback to play the
tape forward at approximately 9 times normal
speed. Press the PLAY button to return to nor¬
mal playback.
•
Press and hold the FF button during fast for¬
ward to visually scan the tape at 19 times the
normal playback speed. Releasing FF returns
the camcorder to fast forward.
*
Press the REW button during playback to play
the tape backwards at approximately 7 times
normal speed. Press the PLAY button to return
to normal playback.
*
Press and hold the REW button during fast
rewind to visually scan the tape backwards at
17 times the normal playback speed. Releasing
REW returns the camcorder to fast rewind.
Note: When you engage FF button or REW but¬
ton the picture will have some interference or
noise in the viewfinder. This is normal during
search mode.
When the LCD monitor is open (Clear
Search):
You can view pictures with less noise on the LCD
monitor during forward or reverse search,
*
Press the FF button during playback to play the
tape forward at 6 times normal play speed.
Press the PLAY button to resume normal play¬
back,
*
Press and hold the FF button during fast for¬
ward to visually scan the tape at 17 times the
normal playback speed. Releasing FF returns
the camcorder to fast forward.
*
Press the REW button during playback to play
the tape in reverse at 4 times normal speed.
Press the PLAY button to resume normal play¬
back.
*
Press and hold the REW button during fast
rewind to visually scan the tape backwards at
15 times the normal playback speed. Releasing
REW returns the camcorder to fast rewind.
Note: If you are using forward or reverse search
with the LCD monitor closed, then you will not
be able to view pictures with Jess noise when
you open the monitor.
Note: Several noise bars will appear on the TV
screen during forward or reverse search.
Note: A noiseless picture will not appear during
high-speed search even if the LCD monitor is
open.
Note:
Noise may flow during high-speed
search in low temperature conditions.
VM-H675LA/V1VI-E575LA/V1VJ-E573LA
E33
Advertisement
Table of Contents
