Table of Contents
Advertisement
18
19
18. LCD Brightness Controls (pi4)
19. 2.5-inch LCD Monitor (pi4)
20. Speaker (p32)
21. Power Supply Attachment
Section (pi7)
22. Clock Battery Compartment
(Pi
3)
.
23. Sub Power Switch
STANDBY:
Pressing the Start/Stop button will
start recording.
LOCK:
The camcorder will not enter the
record mode even if the Start/Stop
button is pressed.
24. Start/Stop Button (p28, 33)
This works as a recording start /stop button in the
CAM mode and as a playback pause button in the
VIDEO mode.
25. BAR EJECT Lever (pi8)
Sliding, and then holding, this switch, remove the
battery from the camcorder.
26. Shoulder Strap Slot (pi6)
27. LCD Monitor OPEN Button (pi4)
To open the LCD monitor.
28. DATE Button (p26)
To set the date or display it.
29. TITLE Button (p46)
To select or create a title, or display one.
30. EFFECT Button (p37)
To record digitally processed image or play back
picture with digital effect added.
31. FOCUS/VOL Control Buttons
(p32, 36)
CAM mode:
To switch between auto focus and
. manual focus, or to control focus
while in. manual focus mode.
VIDEO mode:
To control playback volume.
32. BLC (Backlight Compensation)
Button (p43)
When recording a subject in bright light, hold this
button down to compensate for lighting on tape.
33. MENU Button (p23)
To display the menu.
34. DC IN Jack (p21)
Use this jack to power the camcorder from the AC
adapter or from battery in your vehicle.
VM-H675LA/VM-E575LA/VM-E573LA
Ell
Advertisement
Table of Contents
