Table of Contents
Advertisement
Switching On-Screen Display On/Off
Using menu selection, you can turn off the camcorder status display during playbac
afterwards.
\ Set the CAM /OFF /VIDEO switch to VIDEO.
2 Press the MENU button.
2 Press the PLAY or STOP
button to select "DIS¬
PLAY".
y| Press the REW or FF but-
^ ton to select the desired
mode:
LCD: Information on the tape remaining, time
counter, etc. is displayed on the LCD monitor.
LCD/LINE:
M is displayed beside the time
Setting Playback Mode
Use the menu screen to set the playback mode (tape format).
time'
counter ("Memory Feature", p45). When LCD/
LINE is specified, you can view the information
in the memory displayed on the LCD monitor,
which will be superimposed on the playback
picture seen on. the connected TV.
OFF:
Information on tape remaining
counter, etc. is not displayed.
Note: The battery remaining power level will be
displayed when you use a battery pack as a
power supply.
Note: The date and recording status are dis¬
played on the LCD monitor.
N Press the MENU button.
Set the CAM/OFF/VIDEO switch to VIDEO.
Press the MENU button.
Press the PLAY or STOP
button
to
select
"PB
MODE.".
Press the REW or FF but¬
ton to select the desired'
mode:
D I SPLAY
iHHL-
AUBIO MODE
TSC
A . I M). OU'
detected during piayba
Hi 8/8: With some Hi8/8 r«
not be automatically cie
the option Hi8/8.
Press the MENU button.
Note:
Specify "PB MODE
Digital 8 recorded tapes,
specified with these tapes.
^corded tapes, HI8/8 may
ected: In this case, select
AUTO" to play back
if "PB MODE HiS/8" is
noise will appear and
played back picture cannot be viewed.
AUTO: The tape format will be automatically
Setting Playback Audio Mode
~*a*~~«*
During 11i8/8 playback you can use the menu screen to select digital audio output rrom the DP tormina:.
1 Set the CAM /OFF/ VIDEO switch to
VIDEO.
4
Press the REW or FF button to select the desired
' '
mode:
2 Press the MENU button.
2 Press the PLAY or STOP
button to select "AUDIO
MODE.",
16 BIT: For playback of higher quality stereo
sound.
12 BIT: Select this option to play back ordinary
stereo sound,
w. Press the MENU button
Note: AUTO is automatically set when digital 8
recorded tape is played back,
Converting Analog Signal to Digital Signal(for VM-D965LA)
This camcorder will accept and detect the video and audio recorded on analog video equipment,
it to digital signal and transfer it to equipment with a DV (i.LINK) terminal, (see p. 54)
4 Set the CAM/OFF/VIDEO switch to VIDEO.
2 Ere s •he MENU button.
2 Press the PLAY or STOP
J button to select "A.IN.
D.OUT.A
AUDIO MODE AUK
TSC
Ohi
msEsssKmamam
/I Press the REW or FF button to select the
jt
mode:
OFF: The digital video will be output in ar
with this camcorder.
ON: The analog video will be output in c
with this camcorder,
3 Press the MENU button.
VM-D965LA/VM-D865LA
£49
Advertisement
Table of Contents
