Table of Contents
Advertisement
Side Cabinet Lighting Wiring Diagram
CONTROL
BOARD
(+12VDC) LED-1
(-12VDC) LED-2
The side cabinet on the K750GS model features LED control panel lighting the same as the main
„
control panel. The Cabinet is factory installed on the grill, and the wiring harness for the lighting is
factory connected to the main control board.
ELECTRICAL PRECAUTIONS:
1.
To protect against electric shock, do not immerse cord or plugs in water or
other liquid;
2.
Unplug from the outlet when not in use and before cleaning. Allow to cool
before putting on or taking off parts;
3.
Do not operate any outdoor cooking gas appliance with a damaged cord,
plug, or after the appliance malfunctions or has been damaged in any
manner. Contact the manufacturer for repair;
4.
Do not let the cord hang over the edge of a table or touch hot surfaces;
5.
Do not use an outdoor cooking gas appliance for purposes other than
intended;
6.
When connecting, first connect plug to the outdoor cooking gas appliance
then plug appliance into the outlet;
7.
Use only a Ground Fault Interrupter (GFI) protected circuit with this outdoor
cooking gas appliance;
8.
Never remove the grounding plug or use with an adapter of 2 prongs; and
9.
Use only extension cords with a 3 prong grounding plug, rated for the power
of the equipment, and approved for outdoor use with a W-A marking.
1.800.868.1699
MATE-N-LOK
RECEPTACLE
MATE-N-LOK
PLUG
LED 2
RED
BLACK
LED 1
37
Advertisement
Table of Contents
