Table of Contents
Advertisement
Flame Characteristics
Every burner is tested and adjusted at the factory for proper performance. If a burner is
not operating properly, it may be due to variations in the local gas supply or because of an
obstructed air shutter or orifice. Flames should be stable without lifting from the burner. The
flames should burn cleanly without creating any sooty residue.
Starter Burner Flame Characteristics:
„
The flame should be blue and stable with only a small amount of orange, if any, at the tips. There
should be little noise and no lifting.
On HIGH, the inner cone (Figure 19:A) should be approximately 3/8 inch long.
„
On HIGH, the outer cone (Figure 19:B) should be nearly reaching the bottom of the fire grates (Figure 9:K)
„
B
A
Visually compare the flames in your grill and adjust if necessary, using the instructions on the
following pages.
Cooktop Burner Flame Characteristics:
The flame should be blue and stable
„
with only a small amount of orange,
if any, at the tips. There should be
little noise and no lifting.
„
On HIGH, the inner cone (Figure
20:A) should be approximately 1/2
inch long.
„
On HIGH, the outer cone (Figure
20:B) should be approximately 1 1/4
inches high.
1.800.868.1699
FIGURE 19
B
A
FIGURE 20
27
Advertisement
Table of Contents
