Kalamazoo Gaucho Use And Care Manual page 21

D. Front Starter Burner: The front and rear starter
burners are used to start a wood and/or charcoal
fire. These burners do not provide cooking heat.
They are used only for starting your cooking fire.
Turn the burners off after the wood or charcoal
fire is strong and self-sustaining. Each burner is
protected below heavy gauge sheet metal shields.
E. Front Burner Control Valve: Controls the front
burner (D) and activates the front burner igniter
(F). SEE LIGHTING INSTRUCTIONS.
F. Front Burner Igniter: Lights the front starter
burner (D) and is controlled by the front control
knob (E). Hot surface igniter is activated by
pressing in the front burner control knob. The
igniter is protected by a heavy gauge sheet metal
shield. Use care when cleaning the grill to avoid
damaging the igniter.
G.
Rear Starter Burner: Located across the rear of
the grill and controlled by the rear burner control
valve (H).
H.
Rear Burner Control Valve: Controls the rear
starter burner (G) and activates the rear igniter (I).
I. Rear Burner Igniter: Lights the rear starter burner
(G) and controlled by the rear control knob (H).
FIGURE 9
1.800.868.1699
K
J
FIGURE 8
G
J.
Fire Grates: The fire grates are laser-cut
from thick stainless steel. The special pattern
accelerates fire starting from the starter burners
below and effectively holds the heat and embers
from a mature fire.
K. Grill Grates: Standard grill grates are made from
heavy stainless steel rods. Optional grill grates
enhance performance. Choose from laser-cut
grill grates in patterns optimized for meat, fish or
vegetables. Also available are Argentinian-style
slanted "V" grates with drippings pans. The grill
rack (B) holds up to three grill grates.
I
F
D
H
E
17