Chapter 2. Accessories; Contour Ct28 Rigging System; Tube Mount; Sub Pole Cup - 1 Sound Contour Series Manual

Chapter 2. Accessories

Contour CT28 Rigging System

Angle-adjustable mount for pole or flown deployment
Figure 3. The Contour Rigging System
This adjustable rigging system attaches to the top or bottom of the CT28
and allows for various rigging options such as hanging or attaching to
the Tube Mount. The angle can be easily adjusted and securely fixed
using the included M10×100 ball-lock pin. The Rigging System allows for
up to ±20 degree tilt, in 5-degree increments. The mount is made from
stainless steel 316 and aluminum, with stainless steel or black powder-
coated finish.
The kit includes:
•
The fully assembled Contour Rigging System
•
An M10×100 mm ball-lock pin

Tube Mount

Figure 4. The Tube Mount.
The Tube Mount enables a Contour loudspeaker to be coupled with the
proprietary square-section Active Speaker Tubes or an industry-standard
ø40 mm round speaker tube for deployment of a CT28 or Cannon Series
enclosure on a free-standing base or a CT28 or CT212 atop a SUB215
or SUB2112 subwoofer. The mount attaches to the Contour Rigging
System. The Tube Mount is made of galvanized, zinc plated and black
or white powder coated steel.
The kit includes:
•
The Tube Mount adaptor
•
A ½"x ¾" zinc hex bolt
•
A ½" split locking washer

Sub Pole Cup

Square adapter for subwoofer M20 flange to Active Speaker Tube
Figure 5. Sub Pole Cup
The Sub Pole Cup is made from 4 mm steel and fits in various 1 SOUND
subwoofers in order to mount a satellite speaker enclosure. It couples
with all 1 SOUND Active Speaker Tubes, as well as standard round poles
that have a M20 screw-in bolt. It is available with a black or white finish.
The kit includes:
•
Sub Pole Cup
•
Gasket (pre-installed on the Sub Pole Cup)

Passive 40 cm Speaker Tube

For mounting mounting satellite speaker enclosures atop subwoofers.
Figure 6. The 40 cm (16 in) Speaker Tube.
The 40 cm (≈16") Speaker Tube is a simple steel square-section speaker
pole for mounting satellite speaker enclosures atop subwoofers. It is
available with a black or white finish.
The kit includes:
•
The Speaker Tube