Paradyne 3825Plus User Manual page 101

Symbols
! (hook flash), 4-4
"," dial modifier (Pause), 4-4
"," Pause Time (S8), 4-18
";" (return to command mode), 4-4
@ (quiet answer), 4-4
Numbers
3825Plus modem
AT commands, 4-2
description, 1-1
features, 1-1
operating modes, 4-1
S-registers, 4-17
A
A/ (Repeat Last Command), 4-3
ac power, 2-3
Administration Password
%SA command (Enter), 4-29
%SA= command (Change), 4-29
described, 4-27
Answer mode (ATA), 4-3
Answer Security (S68), 4-30
Asymmetric Rate Mode, 4-19
Async/Sync Mode (AT&M), 4-11
AT Command Mode (S84), 4-25
AT commands, 4-2
"F (Clear Error Buffer), 4-7
"H (V.42bis Compression), 4-7
&&P1 (Clone Remote), 4-8
&C (LSD Control), 4-8
&D (DTR Action), 4-8
&F (Factory Defaults), 4-9
&G (V.22bis Guard Tone), 4-9
&I (Dial Transmit Level), 4-10
&J (Dial Transmit Type), 4-10
&L (Leased Mode), 4-10
&M (Async/Sync Mode and DTE Dialer Type), 4-11
&Q (Async/Sync Mode and DTE Dialer Type), 4-11
3825-A2-GB30-40
Index
&R (RTS Action), 4-11
&S (DSR Control), 4-12
&T (Tests), 4-12
&V (View Configuration Options), 4-12
&W (Write to Memory), 4-12
&X (Transmit Clock Source), 4-13
&Z (Store Telephone Number), 4-13
%A (Error Control Fallback Character), 4-13
%B (Modulation/Data Rate), 4-13–4-15
%C (MNP5 Data Compression), 4-14
%SA (Enter Administration Password), 4-29
%SA= (Change Administration Password), 4-29
%SB (Set VF+DTE Password), 4-29
%SD (Set DTE Password), 4-29
%SP (Display Password), 4-29
%SP= (Clear Password), 4-29
%SR (Reset Security), 4-29
%SV (Set VF Password), 4-29
+FCLASS (Service Class Selection), 4-14
*** (Command Recovery), 4-3
\A (Maximum Frame Size), 4-14
\C (Error Control Negotiate Buffer), 4-14
\D (CTS Control), 4-14
\G (Modem to Modem Flow Control), 4-14
\K (Break Buffer Control, Send Break Control, Break
Forces Escape), 4-15
\N (Error Control Mode), 4-15
\Q (Flow Control of DTE and Modem), 4-15
\T (No Data Disconnect Timer), 4-16
\X (XON/XOFF Passthrough Flow Control), 4-16
A (Answer Mode), 4-3
B (ITU-T/Bell Mode), 4-3
D (Dial), 4-4
DS (Dial Stored Number), 4-4
E (Command Echo), 4-4
H (Hook Switch Control), 4-5
I (Identification), 4-5
L (Speaker Volume), 4-5
M (Speaker On/Off), 4-5
O (Online Mode), 4-5
Q (Result Codes), 4-6
recovering use of, 2-5
Sn? (Display S-register), 4-6
Sn=r (Change S-register), 4-6
V (Result Codes Format), 4-6
X (Extended Result Code, Dial Tone Detect, Busy
Tone Detect), 4-6
January 1999 Index-1